Other aids

HELLING GmbH

Since 1863

Other aids

At HELLING you can find other useful tools for the various NDT procedures such as penetrant testing, magnetic particle testing, leak detection.

Above all, this includes personal protective equipment such as protection against harmful UV(A) radiation.

UV(A) personal protection equipment

Filters Sort results
Reset Apply

UV protection gloves

UV(A) impermeable gloves

  • black velour cuffs
  • Camapren
  • Profiling
  • Size 10
  • Total length 30 cm
Item number :705.000.951
Max:
Min: 1
Step: 1
Put on inquiry list

UV protective over-goggles

UV protective over-goggles for spectacle wearer

  • Transparent frame
  • Complete coverage of the eye area
  • Good to wear over correction eyeglasses
  • Scratch-resistant polycarbonate lens
  • Clear, undistorted view
  • 99.9% protection against UV(A) radiation
Item number :705.000.982
Max:
Min: 1
Step: 1
Put on inquiry list

UV protective goggles MILLENNIA 2 G

Stylish UV(A) protective goggles that absorb 99.9% of UV radiation with a wavelength up to 385 nm.

Glasses

  • clear
  • anti-fog
  • hard coating
  • polycarbonate

Frame

  • black
  • nylon

Application

  • Protection from UV(A) radiation
  • Protection from flying particles
  • Very well suitable for increased air humidity
Item number :705.000.983
Max:
Min: 1
Step: 1
Put on inquiry list

UV protective goggles Millennia

UV(A) protective goggles

  • Black frame
  • Yellow glasses
  • Polycarbonate hard-coated
  • Absorbs 99.9% of UV(A) radiation up to a wavelength of 400 nm
Item number :705.000.972
Max:
Min: 1
Step: 1
Put on inquiry list

Spray tank

More information

Spray cans (pump sprayers, eco-sprayers) are an environmentally friendly and also cost-effective alternative to detection media in spray cans (aerosol), for example, in leak detection, penetrant and magnetic particle testing.

Filters Sort results
Reset Apply

Pressure pump sprayer PROFI

  • Particularly robust, technically sophisticated sprayer
  • With integrated scale
  • Suitable for isopropanol, ethanol and mineral oil products

Technical data

Operating pressure 4 bar
Safety valve Standard or viton seal
Tank volume 1.5 L
Filling quantity max. 1.3 L

OPTIONAL

  • Pressure pump atomizer for isopropanol, ethanol and mineral oil products
  • Pressure pump atomizer for AZO-free penetrants such as MET-L-CHEK Rot 100, Standard-Chek Rot 2003 or Nord-Test Rot 3000

Version:

PROFI for solvent-based media
PROFI only for AZO-free media
red/black
black/black
Item number :126.400.000
Max:
Min: 1
Step: 1
Put on inquiry list

Eco spayer with air filling station

Sprayer (aluminum tank) for penetrant and magnetic particle testing

Refillable by means of compressed air

Technical data

Tank Aluminum with interior protective coating
Operating pressure 6 bar - 8 bar
Max. permissible operating pressure 10 bar
Spray valve interchangeable
Filling valve air valve in the tank bottom with thread (VG 8)
Sealings viton / neoprene
Filling quantity 400 mL
Weight 350 g

Do not use alkaline or acidic agents!


Scope of delivery

Aluminum tank with 2 valves and 4 spray heads

OPTIONAL

  • Air filling station for eco sprayer 
  • Valve with ascending pipe 197 mm
  • Spray head (round jet)

Version:

Eco Sprayer
Air filling station for eco sprayers
Valve with riser 197 mm
Spray head (round jet)
Item number :126.450.000
Max:
Min: 1
Step: 1
Put on inquiry list

Spray pistols and grips

Filters Sort results
Reset Apply

Spray pistol without flow cup

  • Light and handy
  • High-strength plastic
  • Material-carrying parts made of stainless steel
    (suitable for aggressive and water-containing media)
  • Air volume regulation
  • Stepless round and wide beam adjustment
  • Large nozzle selection

Necessary accessories

Art. no. 880.000.004 Flow cup

Version:

Spray gun without flow cup
Flow cup
Item number :880.000.002
Max:
Min: 1
Step: 1
Put on inquiry list

Robust pistol grip

  • Robust design for frequent use
  • Suitable for all spray cans and media
    (testing agents, cleaners, paints, lubricants, etc.)
  • Ergonomic design
  • Controlled spraying
  • Handy grip
Item number :129.800.003
Max:
Min: 1
Step: 1
Put on inquiry list

Pistol grip for a spray cans and a pocket lamp

  • Handy pistol grip for controlled spraying.
  • Suitable for all spray cans and media
    (testing agents, cleaners, paints, lubricants, etc.)
  • Suitable for holding a UV LED lamp - UV-Inspector 2020 (Art. No. 142.200.130) - for spraying fluorescent test agents under UV-A irradiation.
Item number :129.800.005
Max:
Min: 1
Step: 1
Put on inquiry list

Pistol grip for a spray cans and 2 pocket lamps

  • For all spray cans Spray cans for spraying test agents, cleaners, paints, lubricants, etc.
  • Handy grip
  • Enables controlled spraying under UV irradiation or white light illumination by accommodating two hand lamps, e.g. one UV LED and one white light LED lamp.
Item number :129.800.xxx
Max:
Min: 1
Step: 1
Put on inquiry list

Documentation sheets

More information

Inspection practice often requires fast, cost-effective and permanent documentation of an inspection result, e.g. documenting a crack pattern.

The PT-MT Docu Film is especially suitable for fixing indications, surface roughnesses as well as for reproducing a crack pattern to be fixed. It is to be equated with photographic reproduction.

The foil can be applied to both straight and curved surfaces. Due to its high flexibility and affinity to the surface, it ensures very good fixation of the indications.

Filters Sort results
Reset Apply

Documentation sheets

The documentation sheet is characterised by

  • High flexibility
  • Good fixability
  • Good suitability for curved surfaces
  • Formats 13 cm x 18 cm and 13 cm x 36 cm
  • Colours black, white and transparent

Scope of delivery

  • 1 PU = 10 sheets

Version:

13x18 cm Black
13x36 cm Black
13x18 cm White
13x36 cm White
13x18 cm Transparent
13x36 cm Transparent
Item number :134.007.311
Max:
Min: 1
Step: 1
Put on inquiry list

Electrostatic coating

More information

Electrostatic coating

The particles of the test medium (penetrant, developer) are charged with a negative voltage. The test part is grounded and thus attracts the charged particles. The resulting force field produces what is known as the wrap-around effect. This means that not only the front side of the test specimen is coated, but also its back side.

Filters Sort results
Reset Apply

Electrostatic system

Coating process

  • Produces very homogeneous layer thicknesses
  • Minimized droplet size
  • Low material consumption
  • Reduction of the testing time
  • Reduction of disposal costs

Scope of delivery

  • Piston pump
  • Spray gun GM 5000EACFB
  • Cable length 20 m
  • Control unit VM5000
  • Protective hose
  • Filter set
  • Nozzles ACF Brilliant
  • Air cap e4EAC Brilliant
  • Agitator
  • Release agent 250 mL
Item number :128.400.001
Max:
Min: 1
Step: 1
Put on inquiry list

Suche auf www.helling.de

Search on www.helling.de

WordPress Cookie Plugin by Real Cookie Banner