…be used are colourless, odourless and skin-compatible. They have a low viscosity. As a result, the finished suspensions have only short dripping times. The product range also includes ready-to-use suspensions…

…accordance with the standards, such as: Testing device (hand magnetisation yoke) Test material (magnetic powder suspension, background colour and special remover) Measuring devices (illumination and irradiance meter, field strength meter)…

…and colour contrast penetrant testing are: Penetrant testing is an easy-to-use and sensitive method for in-situ surface crack testing; cracks <1 µm are detectable. Very wide range of application, as…

…subdivided according to DIN 5031 “Optical radiation physics and illumination engineering, quantities, symbols and units” into: UV-A (400 – 315 nm, long-wave) UV-B (315 – 280 nm, short-wave) UV-C (280…

…on Industrial Safety and Health, Section 2BGR 500.2.8, (formerly UVV 18.4.) and DIN 685-5 “Tested round steel chains, individual parts and accessories – Part 5: Use of chain slings and…

…ASTM E165/E165M ASTM E1417/E1417M Halogen and sulphur-free tested and certified according to ASTM E165/E165M ASTM D516 KWU EN ISO 3452-2 Met-L-CHEK More information MET-L-CHEK testing products marked with *** are…

…gas through a defect (leak) in a component (pipeline, container). A leak can be, for example, a crack, a breakthrough, a notch or a hole. Through these material defects gas…

…are measured and evaluated: Position (x/y, inclination) Size (mm/pixel) Evaluation (IO/NIO) Defect type (longitudinal/transverse) HCC protocol The system is easy to use and can be adapted to the customer’s requirements….

…Connect Control System (HCC). Anti-reflection spray Excellent antireflection and matting of reflective surfaces prior to scanning and measuring of components (NDT) and in the dental field (plaster models, wax ups,…